S-150 220V Input Voltage and 101 – 200W Output Power 5v 12v 15v 24v 9v antenna switching power supply

Input current:3.2A/115VAC          1.6A/230VAC

Output current range:0 ~ 30A

DC output power:150W

Overall dimension:199*110*50mm (L*W*H)

  • Description
  • PDF Datasheet
ModelS-150-5S-150-7.5S-150-9S-150-12S-150-13.5S-150-15S-150-24S-150-27S-150-48
OutputDC Voltage5V7.5V9V12V13.5V15V24V27V48V
Rated Current30A20A16.7A12.5A11.2A10A6.5A5.6A3.2A
Current Range0 ~ 30A0 ~ 20A0 ~ 16.7A0 ~ 12.5A0 ~ 11.2A0 ~ 10A0 ~ 6.5A0 ~ 5.6A0 ~ 3.2A
Rated Power150W150W150.3W150W151.2W150W156W151.2W153.6W
Ripple & Noise (max.) Note.2150mVp-p150mVp-p180mVp-p180mVp-p180mVp-p180mVp-p240mVp-p240mVp-p240mVp-p
Voltage Adj. Range4.5 ~ 5.5V6~8.3V8 ~ 10.4V10.6~13.2V12 ~ 15V13.5~16.5V21~28V24 ~ 30V43 ~ 53V
Voltage Tolerance Note.3±2.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%
Line Regulation±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%
Load Regulation±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%
Setup,Rise, Hold time100ms, 50ms, 20ms at full load
InputVoltage Range88 ~ 132VAC/176 ~ 264VAC selected by switch          248 ~ 370VDC
Frequency Range47~63HZ
Efficiency(Typ.)78%80%80%82%83%84%85%86%87%
AC Current3.2A/115VAC          1.6A/230VAC
Inrush Current (max.)COLD START 35A
Leakage Current<3.5mA / 240VAC
ProtectionOver Load105 ~ 150% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
Over Voltage5.75 ~ 6.75V8.63 ~ 10.13V10.35 ~ 12.2V13.8V~16.2V15.53 ~ 18.2V17.3V~20.3V30V~34.8V31.1 ~ 36.45V55.2 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
EnvironmentWorking Temperature-10 ~ +60°c (Refer to output load derating curve)
Working Humidity20~90% RH  Non-condensing
Storage temp.& humidity-20~+85°C, 10~95%RH
Temp. coefficient±0.03%/°C (0~50°C)
Vibration10 ~ 500Hz, 2G 10min./1 cycle,60min.each along X,Y,Z axes
Safety & EMC

(Note 4.)

Safety StandardsUL1012, UL60950-1, TUV EN60950-1 Approved
Withstand VoltageI/P-O/P:3KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI Conduction & RadiationCompliance to EN55022 (CISPR22) Class B
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level,  criteria A
OthersMTBF286.7K hrs min.      MIL-HDBK-217F (25°c )
Dimension199*110*50mm (L*W*H)
Packing0.8Kg; 20pcs/13.8Kg/0.95CUFT
Note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Online Service
Live Chat