single output MS-35 35w smps 12v switch mode power supply led transformer

Input current:0.6A/115VAC         0.35A/230VAC

Output current range:0~7A

DC output power:35W

Overall dimension:84*58*38mm (L*W*H)

  • Description
  • PDF Datasheet
ModelMS-35-5MS-35-12MS-35-24
OutputDC Voltage5V12V24V
Rated Current7A3A1.5A
Current Range0~7A0~3A0~1.5A
Rated Power35W35W35W
Ripple & Noise (max.) Note.250mVp-p100mVp-p100mVp-p
Voltage Adj. Range4.75~5.5V10.8~13.2V21.6~26.4V
Voltage Tolerance Note.3±2.0%±1.0%±1.0%
Line Regulation±0.5%±0.5%±0.5%
Load Regulation±1.0%±0.5%±0.5%
Setup,Rise time300ms, 50ms/230VAC         800ms, 50ms/115VAC at full load
Hold time (Typ.)90ms/230VAC         12ms/115VAC at full load
InputVoltage Range85 ~ 264VAC         120 ~ 370VDC
Frequency Range47~63HZ
Efficiency(Typ.)72%/115VAC76%/115VAC80%115VAC
AC Current(Typ.)0.6A/115VAC         0.35A/230VAC
Inrush Current (Typ.)COLD START 13A/115VAC         25A/230VAC
Leakage Current<0.75mA / 240VAC
ProtectionOver Load105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
EnvironmentWorking Temperature-10 ~ +60°c (Refer to “Derating Curve” )
Working Humidity20~90% RH Non-condensing
Storage temp.& humidity-20~+85°C, 10~95%RH
Temp. coefficient±0.03%/°C (0~50°C)
Vibration10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety & EMCSafety StandardsUL1012, TUV EN60950-1 approved
 Withstand VoltageI/P-O/P:1.5KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
(Note 4.)Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/ 25°c / 70% RH
 EMC EmissionCompliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
 EMC ImmunityCompliance to EN61000-4-2,3,4,5, EN55024, light industry level, criteria A
OthersMTBF330.8K hrs min.     MIL-HDBK-217F (25 °c)
Dimension84*58*38mm (L*W*H)
Packing0.17Kg; 80pcs/13Kg/0.9CUFT
Note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°c of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
Online Service
Live Chat