single output S-15 15w smps 24v switch mode power supply led transformer

Input current:0.5A/115VAC          0.25A/230VAC

Output current range:0~3A

DC output power:15W

Overall dimension:99*97*35mm (L*W*H)

  • Description
  • PDF Datasheet
OutputDC Voltage5V12V15V24V
Rated Current3A1.3A1A0.7A
Current Range0~3A0~1.3A0~1A0~0.7A
Rated Power15W15.6W15W16.8W
Ripple & Noise (max.) Note.250mVp-p50mVp-p50mVp-p100mVp-p
Voltage Adj. Range4.75~5.5V10.8~13.2V13.5~16.5V21.6~26.4V
Voltage Tolerance Note.3±2.0%±1.0%±1.0%±1.0%
Line Regulation±0.5%±0.5%±0.5%±0.5%
Load Regulation±1.0%±0.5%±0.5%±0.5%
Setup,Rise, Hold time200ms, 100ms, 30ms at full load
InputVoltage Range85 ~ 132VAC / 170 ~ 264VAC selected by switch          240 ~ 370VDC
Frequency Range47~63HZ
AC Current0.5A/115VAC          0.25A/230VAC
Inrush Current (max.)COLD START 15A/115VAC          30A/230VAC
Leakage Current<0.5mA / 240VAC
ProtectionOver Load105~150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Over Voltage5.75V~6.75V13.8V~16.2V17~18.5V27.6V~32.4V
Protection type :  Fold back current limiting, recovers automatically after fault condition is removed
EnvironmentWorking Temperature-10 ~ +60°c (Refer to output load derating curve)
Working Humidity20~90% RH  Non-condensing
Storage temp.& humidity-20~+85°C, 10~95%RH  non-condensing
Temp. coefficient±0.02%/°C (0~50°C)
Vibration10 ~ 500Hz, 2G 10min./1 cycle,perriod for 60min.each along X,Y,Z axes
Safety & EMC

(Note 4.)

Safety StandardsDesign refer to UL1012
Withstand VoltageI/P-O/P:1.5KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI Conduction & RadiationDesign refer to FCC Part15 J Conduction Class B
OthersMTBF522.1K hrs min.      MIL-HDBK-217F (25°c )
Dimension99*97*35mm (L*W*H)
Packing0.35Kg; 45pcs/15Kg/0.9CUFT
Note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
Online Service
Live Chat