w ac dc power supply/12 volt 5 amp switching power supply/60w 12v led psu s-60-12

Input current:2A/115VAC          1A/230VAC

Output current range:0-12A

DC output power:60W

Overall dimension:159*97*38mm (L*W*H)

  • Description
ModelS-60-5S-60-12S-60-15S-60-24
OutputDC Voltage5V12V15V24V
Rated Current12A5A4A2.5A
Current Range0~12A0~5A0~4A0~2.5A
Rated Power60W60W60W60W
Ripple & Noise (max.) Note.2120mVp-p120mVp-p150mVp-p150mVp-p
Voltage Adj. Range4.75~5.5V10.8~13.2V13.5~16.5V21.6~26.4V
Voltage Tolerance Note.3±2.0%±1.0%±1.0%±1.0%
Line Regulation±0.5%±0.5%±0.5%±0.5%
Load Regulation±1.0%±0.5%±0.5%±0.5%
Setup,Rise, Hold time300ms, 50ms, 80ms/230VAC       800ms, 50ms, 10ms/115VAC at full load
InputVoltage Range85 ~ 132VAC / 170 ~ 264VAC selected by switch          240 ~ 370VDC
Frequency Range47~63HZ
Efficiency(Typ.)73%76%77%79%
AC Current2A/115VAC          1A/230VAC
Inrush Current (max.)COLD START 30A/115VAC          60A/230VAC
Leakage Current
ProtectionOver Load110~115% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Over Voltage5.75V~6.75V13.8V~16.2V17.25V~20.25V27.6V~32.4V
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
EnvironmentWorking Temperature-10 ~ +60°c (Refer to output load derating curve)
Working Humidity20~90% RH  Non-condensing
Storage temp.& humidity-20~+85°C, 10~95%RH
Temp. coefficient±0.03%/°C (0~50°C)
Vibration10 ~ 500Hz, 2G 10min./1 cycle,60min.each along X,Y,Z axes
Safety & EMC

(Note 4.)

Safety StandardsUL1012, UL1950, TUV EN60950 Approved
Withstand VoltageI/P-O/P:3KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI Conduction & RadiationCompliance to EN55022 (CISPR22) Class B
Harmonic CurrentCompliance to EN61000-3-2,-3
EMS ImmunityCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level,  criteria A
OthersMTBF316.2K hrs min.      MIL-HDBK-217F (25 °c )
Dimension159*97*38mm (L*W*H)
Packing0.51Kg; 30pcs/19Kg/0.7CUFT
Note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Online Service
Live Chat